...
- Created vinyl pieces for Catwalk Weather Wall, equipped with grommets and magnetic door strips. Located in upper tween shop.
- Added a Catwalk section to Confluence Laboratory Manuals, Guides and Resources page, and rearranged the General section and added a few things to the acid tank page.
- IODPS display in BPLAN.
- Complete inventory of T-Slot bulk materials, nuts, bolts, brackets and hardware sent to Brad and Bill. Ordered more bolts and nuts for general purposes.
- Tested out new Zebra Label printers. Label formats are retained, that is, the code does not need to be modified. However, the printers require detailed setup to get the labels to print evenly and completely.
Discussion/Important info. for upcoming expedition
During EXP395E we did not split any cores containing hardrock. Any cores (entire core, not just sections) that contained the sediment/basalt interface were to remain intact in the core liner. The science party requested they stay onboard and be curated when the actual expeditions occur. The end caps were taped and the sections were shrink wrapped, stored in UV light resistant bags (silver wine bags) with Oxygen Absorbers and flushed with N2. These will remain onboard until the Trans-Atlantic Expeditions (390 & 393). They are stored in a wooden crate in the Port-Aft corner of the reefer, with 395E cores added to the top box of 390C cores.
Thanks for everything you guys! I wish you all happy and safe sailing. I am a richer person for having sailed with you folks, and I hope to see you at the beach in Hawaii. ALOHA!