...
Figure 3- XMSL Measurement Editor Window
Once the parameters are set click 'Accept Changes'. To revert any changes back to the original settings click 'Cancel Changes'.
Start Imaging
Sample Information Window
Click START on the IMS panel (Figure 2) to open the sample information window (Figure 4). This is where the user enters the sample ID for a section and initiates the measurement. There are three tabs available on the sample information screen. Each provides a different method for entering the sample ID information.
Sample Entry Tabs
...
.
Figure 4- Sample Information Window- Scanner entry (left), LIMS entry (middle), and Manual Entry (right).
...
When the imaging is complete, IMS will automatically process the raw images and output them to the AUX_DATA folder. These are not the primary processed images, but are available for quick image evaluation. The raw images output to the DATA > IN Folder. For more information on IMS image processing, see the Automatic Image Processing section in the user guide.
...