Versions Compared

Old Version 4

changes.mady.by.user jr_novak

Saved on

compared with

New Version 5

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: very minor tweaks

...

Figure 8 will be displayed when the X-ray Off command is sent to the CP160CP120 source.  The window will be displayed until the kV has been confirmed to be at zero.

You will also see this window flash on during X-Ray START when the CP160 CP120 fails to respond to the start command.  The X-ray off will reset communications with the CP160 CP120 and bring it to a known state which will clear any communication issue.

...