...
Laser engraver is used to engrave section information on the plastic core liner as backup label. It is mandatory for first time user to be properly trained, to review the safety document, and to take a laser safety examination before use.
IV.
...
DURING CORING OPERATIONS
A. Core on deck
- Receive cores on the catwalk when "Core on Deck" is called.
- Assist curator/ALO and fellow technical staff in processing and curating cores on the catwalk.
- Carry cut section whole round cores into the core lab and place them in the laser engraver.
- Proceed in labeling each section in the core entry area with engraving, marking the endcaps, and apply barcode label.
- Re-locate the labeled sections to designated shelf to make room in the laser engraver for the next core.
- Distribute printed barcode labels to designated location, prepare/label D-tubes for core storage.
- Clean the catwalk and re-stock supply when necessary.
...
- Core on deck – every core
- Core labeling – every core
- Core splitting – every core
- Core boxing – as needed
- Supplies stocking – as needed
- Cleaning and housekeeping – per shift and as needed
- Equipment maintenance and repair – as needed
V.
...
DURING TRANSITS
- Continue processing cores through the lab as described above
- Lab cleaning
- Preparing for upcoming site
VI.
...
DURING EXPEDITION
- Maintain inventory by performing physical counts. Notify the ALOs if any quantity discrepancy or unusual high usage occurred.
...