Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Best case. Plug the USB to RS485 (or other serial device) back in and it picks right up again.
  • Middle of the road.
    • SLB2RW program must be shutdown and restarted to resynchronize with the WPS feed.
    • Possibly the instance of RigWatch at Remote 6 would need to be restarted.
  • Worse case. The whole winch telemetry host must be shutdown and restarted.
  • Worst case. Even if the winch telemtry telemetry host is working as expected after restart, it is possible that a "hang-up" and "re-connect" at the RigWatch Master may not work (seen once).

That "seen once" was corrected by a restart of RigWatch. Not

...

a desirable activity during rig-floor operations and continuous data collection.