...
On the laptop, MUT2 will already be configured for use. However, if something is not working, there are a few things to check. If files are not listed, check the upload directory. Under 'Options' in the program menu bar, select 'Set Upload Directories...' (Fig 21) and the DATA\IN folder should be listed (Fig 22). In this window, the bottom portion also allows you to nominate files to not display in MUT2, even when they are required for upload. Because each measurement creates an individual .pdz file, this becomes a lot of files for MUT2 to keep checking every 5 seconds and causes problems. Under 'Set active analyses...', be sure that the 'Handheld X-Ray Fluorescence Analysis' is set as the 'Active Analyses' (Fig. 23).
Figure 21. The Options menu.
...
Figure 22. The list of directories to direct MUT2 to upload from. The bottom portion allows the nomination of files to not display in file list.
Under 'Set active analyses...', be sure that the 'Handheld X-Ray Fluorescence Analysis' is set as the 'Active Analyses' (Fig. 23).
Figure 23. Setting the active analyses for MUT2 on the pXRF laptop.
...