Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Click START and the SHIL Section Information screen (Figure 3) will appear.
  2. Scan the section barcode from the endcap.
  3. Select the 360 Imaging type and the default quadrant will be 0°. Select Dry-Hard Rock. Click TAKE A PICTURE.
  4. When the scan is finished, the image cropping window will open. Crop the image along the core liner and save it.
  5. The whole round rotation window will open and the rotation angle will default to the next quadrant, in this case, 90°.
  6. Replace the aluminum strip and rotate the tray to the next position, remove the aluminum strip facing up. Ensure that the rotation angle setting in the window is that same as on the tray. Click TAKE A PICTURE.
  7. Continue the cropping, rotating and scanning process until all quadrants are complete. Once the images are uploaded to the database, the Imaging Specialist will create the 360 composite image and upload it to the database. If an image needs to be discarded, the software returns to the main screen and the user will need to start over, however, the user can select which quadrant to start on.


Archive Versions

LMUG-SHILQuickStartGuide-240220-2333-320.pdf