Introduction
...
- Pause the program.
- Select MANUAL PICK tab (Figure 9).
- Click on the crosshair tool on the far left side of the toolbox bar. Hover over the dotted yellow-green vertical pink line. When the icon changes, click and drag the pick line to the desired location and release. The Velocity –Manual box will be updated with the manually picked velocity. Both the 'auto-pick' and 'manual pick velocities' are saved simultaneously to the database upload.
Figure 9.- Manual Pick display with yellow-green pink manual pick location.
C) Running a Standard as a QAQC Check
...
This document originated from Word document Gantry Velocity: Quick Start Guide Version 1.0; Version 372 written by A. de Loach (2017-12-16). Credits for subsequent changes to this document are given in the page history.
...