• Introduction
  • Getting Started
• Making a Measurement
• Uploading Data to LIMS
• QE Pro Calibration

...

1. Place section in the core tray. Make sure the section is oriented blue endcap up, and is flush against the benchmark (Figure 2). Figure 2.- Benchmark
2. Adjust the section so that it is parallel to the benchmark.
3. Click START. The Section Information screen is displayed (Figure 3).  Figure 3.- Section Information Screen
4. Place the cursor in the SCAN field and scan the section label. SAMPLE ID and LIMS ID automatically fills. These ID tags contain information on expedition, site, hole, core, section number and length.

...

Version 2 of this document was edited by T.Cobb during expedition 368 (2016). Credits for subsequent changes to this document are givben given in the page history.

Even if only the name of one technician appear as the one who makes the changes, the group of Laboratory technicians, ALOs and LOs are working together to improbe Quick Start Guides and User Guides of the instrumentsAll improvements to the Quick Start Guides and User Guides are a communal effort, with honorable mention to the group of LOs, ALOs, and technicians.

Archived Versions