...
Tips: If the powder sticks to the sample table when you flip it upside down to release, try it again with a piece of weighing paper placed on top of the platform and then clip the top ring in. If you don’t have enough power to fill the sample holder, after pressing down with the cylindrical press add one of the cardboard spacers so that the cardboard spacer is flush with the ring top and then clip in the holder base. Also note that if there is too much sample the back of the holder will not attach.
1.)
2.)
3.)
4.) 
5.) 
6
6.) 
7.)
Figure 2: Sample preparation for Aeris backloading sample holders.
...