Versions Compared

Old Version 3

changes.mady.by.user jr_crowder

Saved on

compared with

New Version Current

changes.mady.by.user jr_bravo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Standard Operating Procedures –Imaging Specialist
March 2018 

The Imaging Specialist is a Marine Technician who has been assigned to work in the Imaging Lab on the ship and who will have imaging-related and other duties assigned on shore. The Imaging Specialist will share their ship duties between the Imaging Lab and Core Lab.

SHIP
I. PRE EXPEDITION

  • See General JRSO Technician SOP

As time permits in the office, a few tasks can be done ahead of time to save time on the ship. The final crew lists may or may not be available until aboard the ship.

II. PORT CALL - Start of an Expedition

  • Shoot Mug shots (or collect) headshot photographs of scientists, ship’s crew, catering crew and JRSO marine laboratory specialists, usually after one of the first meetings. Get updates on assignments from EPM and LO as changes might happen (due to berthing, sudden sickness or other misc. reasons). Post and distribute mug shot contact sheets headshot posters as soon as possible but definitely before the end of port call. The mug shots headshots are critical to help the scientists, techs, and crew get to know eachothereach other.
  • Assist in making IDs for scientists and IODP JRSO staff (if needed).
  • Take mug shots of new SIEM/Entier personnel – produce poster before port call ends.
  • PR Images as required, assist with PR tours as requiredCalibrate monitors  in the imaging office.
  • If public relations (PR) activities are planned for the port call, coordinate with the LO as to what the expectations are for the JRSO imaging specialist’s duties. This will usually involve taking photographs of VIPs, tour activities, and the like, but may include escorting PR tours through the ship.

III. SITE PREPARATION - Prior to arrival on site and core on deck

  • Give the photo policy imaging talk to scientists, this covers current core and close up photography policy.
    • This information is covered in the Imaging presentation given to the science party at the start of the cruise, but is included here as a reminder. The science party has the power to make decisions regarding sample preparation prior to imaging on the Section-Half Imaging Logger (SHIL). Therefore, the decision to scrape or not scrape or to photograph core sections dry versus wet should be driven by scientific needs (e.g., scraping may resolve features that were concealed when the core was split or it may create unwanted “artificial” features). The goal is to collect the best image possible to use in the VCDs and other graphics, with the scientists deciding how they want the core sections prepared for imaging.
  • Meet with microscope users and find out how they would like the microscopes configured and configure them appropriately.Check calibration of the core image scanner
  • Provide training to scientists on microscope usage (including microscope camera) and data upload/download procedures.
  • Assist in core lab preparation according to the Core Lab SOP.

IV

...

. DURING CORING OPERATIONS

  • Assist in core processing according to the Core Lab SOP. This is a primary function of any marine technician (with few exceptions like chemistry technicians, who have a different role) and should be your highest priority.
    • If there are imaging-related tasks that need to be performed (e.g., closeup requests, occasionally capturing images of crew, staff, and scientists as they work), then coordinate that work vs. the core processing with the ALO on duty.
  • Download all SHIL images from ImageGrabber and check for accuracy of information, missing images, and image quality.
  • Look for any missing images, missing or incorrect spacers (e.g., 10 cm spacer used when it was a 5 cm whole-round), image quality, etc. Perform this duty 2-3 times a shift depending on core flow and bring any issues to the attention of the core lab staff routinely.
  • If applicable (igneous rock expeditions only), stitch WRND quadrant images to create 360 WRLSC (composites). Keep up with the core flow as these will keep coming during hard rock expeditions. Upload the WRLSC with the 360 uploader software. Check your uploads frequently in the associated LIVE template. More information about the process can be found in the Imaging Lab Notebook.
  • Shoot requested close-ups daily and post on upload to the server.
  • Shoot or assist taking PICAT images of Thin Section slides, daily if applicable.
  • Check in with paleo scientist scientists occasionally to make sure all optical microscopes are functioning correctly .
  • Monitor the microscope users for issues and procedure in acquiring and uploading images.
  • If available, assist in core processing according to Core Lab SOPand that they understand the software and are uploading their images to the LIMS appropriately.

V.

...

  • Continue processing cores through the lab as described above

VI. During Expedition

...

DURING EXPEDITION

  • Photograph any needed PR or engineering photographs as requested. Maintain Metadata for the still images, which were density-color corrected and transmitted to shore. Blanket append all meta data for all the raw images using Bridge Templates or other suitable means to identify every image with at least the expedition number, organization, place, and creator of the images with copy right and contact information (agreed terminology is photographer's name, IODP JRSO or the organization that applies).
  • Interface with the sailing Publications Specialist and the Staff Scientist and create weekly images Create weekly images and collect them from other contributors (submitting photographs for the weekly photos should be encouraged to all staff and scientists) and create captions to be transmitted to shore to the IODP WebmasterPublications department on shore (find a list and the detailed SOP in the Lab Notebook) after approval from EPM, LO and captain. This task should be limited to approximately 8 hours a weeka reasonable amount of time per week, usually no more than 8-12 hours.
    • Be inclusive with photo selection to gain the perspective of others, who may appreciate having photos posted that they have taken.
  • Perform all necessary cleaning and maintenance on machinery and equipment.
  • Maintain inventory by monitoring quantities and performing physical counts. Notify the ALOs if any quantity discrepancy or unusual high usage occurred.
  • Shoot video as requested; these requests should come through the .

    

...

VI. END OF EXPEDITION ACTIVITIES

  • Shoot Group, Tech and Science group photographs at appropriate time (usually shot after abandon ship drill - work with Captain and LO/ALO on timing). Print and Distribute distribute to all shipboard members. The number is normally limited to those who participated in the big group photo or photographer's discretion. This can be done mid-legcruise.
  • Create transfers for Produce t-shirt printing. Create Logo sticker for stairwaytransfers for the winning logo and coordinate the pressing party. Create a logo copy for the stairwell, upload winning logo to NAS server.
  • Provide return to work date when requested by LO.
  • Write end-of-cruise lab report. NOTE: Your lab report should contain (if applicable):1)Introduction paragraph that summarizes lab activities for the leg.2)The number of samples or data points collected.3)Specific problems encountered and how they were overcome.4)Current equipment, software and database status.5)List of equipment returned for repairs.6)Notes about any changes made to manuals.Turn in a Rich Text Format (Microsoft Word) copy to and provide digital copy as directed by the LO.
  • Copy SHIL images, RGB, high-res RGB, ROI, Microscopic images from the Zeiss camera in MBIO on data1
  • Copy the lab report and all other data /wiki/spaces/LN/pages/7338166069 collected (images, close-up spreadsheet, inventory, microscope inventorySHIL calibration, RAW and edited images, etc.) on two an external hard drives drive to be taken to IODP for photography archive on shore (no system set yet, ask David Houpt about specifics). This data is then moved to local archive on the Drobo in the imaging lab).Make sure all data are sent to LIMS before the MCSs cut off database access. All non-essential data should be erased from the hard disks of all the computersthe /wiki/spaces/LN/pages/7338176577 for temporary storage (~4 months).
  • Upload only the edited weekly photos to the 'Public' folder in the NAS and a copy of the Logo to the 'Expedition logo' folder. Add any new headshots and the headshot posters to the 'Imaging' folder on the NAS.
  • Pack up equipment being returned for repairs and give the Assistant Lab Officer the following information: IODP inventory number, value, weight, serial number, model number, vendor's name and country of manufacture.
  • Give the Lab Officer a list for port purchases if any.
  • Perform the end of Expedition maintenance as listed in instrument user guide.

...

  • .
  • Scan and save log sheets in pdf format (e.g. close-ups, thin sections, etc.), by log sheet type, and collated either by site or one file for the whole expedition. Name files as: "logsheets_[analysis + instrument]_exp.pdf", e.g. "logsheets_closeups_398". Place the pdfs in DATA1/1.9 Laboratory Log Sheets. Discard physical documents unless a sailing scientist request them.

VII. PORT CALL – Off Going

  • Find the oncoming Imaging specialist and cross over. Make available a copy of your tech report for cross over. Make sure the on-coming staff is aware of any changes made to the lab, procedures, current equipment status, and port purchases if necessary.

SHORE
I. POST EXPEDITION

  • Copy the expedition file folder to the local, shore based computer. Make corrections to images and add all keywords/metadata to the raw image files in Adobe Bridge. Copy the unedited raw files to Cumulusthe MerlinOne digital asset management (DAM) system. Edit the raw files and burn DVD's. Save the edited raw files as Photoshop format files and upload to CumulusMerlinOne, then burn DVD's of the edited Photoshop image files and produce contact sheets. Place the DVD's with contact sheets in a binder and store with the expedition binders. THIS IS ALL STILL UNDER DISCUSSION. CDs seem not be necessary anymore and the binders and sheets neither. More discussion to streamline the process is needed on shore.

II. PROVIDE PHOTOGRAPHY

  • Passport/ID images per request.
  • Special projects (which may include special events, product photography for the website, or other with the approval of the supervisor.

III. MICROSCOPE SUPPORT

  • Provide microscope support as needed or requested.

IV. DATA REQUESTS

  • Provide image support for the data librarian.

V. SPECIAL PROJECTS

  • Such as lab working groups, hardware upgrades, etc. assigned by supervisor.