Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  Note: If you see any change in image quality, please contact the PP or Imagining Imaging technician.

  1. For sediment cores: Using either a stainless steel spatula or glass slide, scrape the surface of the core. Scrape sections from bottom to top, ensuring that the section surface is clean and flush to the section liner. If necessary, remove excess moisture using paper towels.
  2. Place section in the core tray. Make sure the section is oriented blue endcap towards camera, and is flush against the red benchmark (Figure 2).

...


    Note: Selecting 360 Imaging, intializes  intializes Imaging Control, allowing a user to select the angle of rotation. For more information see section of guide below.


Wet/Dry:

Soft Sediment: Used for sediment cores

...

Sampled-Altered: Used for cores which have either been sampled , or altered in anywayany way.


   Note: Natural geological alteration within the core material , does not qualify as a Sampled-Altered condition.

...

All improvements to the Quick Start Guides and User Guides are a communal effort, with honorable mention to the group of LOs, ALOs, and technicians who have helped.

Archived Versions

...