A Non-Description Tech's Guide, V378P | July 2018
Introduction
This guide covers 16 of the most commonly asked questions by description and paleontology scientists about DESClogik. The guide is intended to assist technicians and scientists when the Description technician is unavailable. There are images and callouts provided with the answers; however, there are other resources and guides which may be very useful in answering these questions. Those guides, and this one, are located on the VOL1 server in the following location:
V:\IODP_Share\ALL things DESClogik\Technician Guides and Quick Starts
The questions are listed below, click to see their answers.
FAQ Table of Contents
1. I can't login to DESClogik.
2. Which template do I use?
3. I am a paleontologist, how do I enter my samples?
4. How do I find my samples in DESClogik?
5. How Do I upload data, and how do I know it's been uploaded?
6. How do I download my data/Why can't I download my data?
7. How do I delete (cancel) data?
8. How do I export an Excel copy of my data?
9. How do I import data to my template?
10. How do I move, widen, or remove columns/Can I change the look of my template?
11. My data looks different then when I uploaded it/there are duplicate descriptions?
12. DESClogik froze while uploading data, what do I do and how can I recover my data?
13. DESClogik gives a warning message when I try to exit/clear samples?
14. Do I need to describe the missing whole-round samples, like PALs and IWs, in DESC?
15. Where are hand lenses, scrapers, smear slide sheets, etc....?
16. I need to add a term to our value lists.
1. I can't login to DESClogik.
If a scientist is having trouble logging into DESClogik, they may have changed their e-mail password but not changed their LIMS password. Their default password should still work, $Firstname@2017. To change their LIMS password to match, go to the ship website, Access LIMS Applications, 2nd from the top of the list is Change password. Enter info and it should change instantly. Hold Ctrl+click the link to go to the page.
http://web.ship.iodp.tamu.edu/ChangePassword/
Another reason their login isn't working might be their privileges have not been set to allow access. The Curatorial Specialist is responsible for setting these privileges, so check with them. Generally, it's not very restricted.
2. Which template do I use?
Templates are typically named as EXP_description level, e.g. 368_macroscopic or 368_foram.
Core describers at the main description tables use the macroscopic template. Thin section descriptions and smear slides go in the EXP_microscopic template. Paleontologists use the template named for their discipline, so EXP_foram or planktonic_foram or benthic_foram, nanno or nanno_fossil, diatom, or finally EXP_radiolaria or EXP_rads.
To select a template click on the big "T" at the top left of the main screen in the Spreadsheet Tools tab and choose from the templates listed by group (expedition). Double click the one you're looking for. All other expeditions should not be visible to the scientist; if they are, notify DESC Tech (admin). This screen is shown in Figure 1 below.
Figure 1. Template Selection
3. I am a paleontologist, how do I enter my samples?
Paleontologists and smear slide (SS) describers are responsible for creating their own samples using Sample Master. In general, paleo samples are children of the PAL whole round with the test being their respective paleontological sub-discipline. SS samples will be children of either the archive or working section-halves. Two separate quick guides have been created and are usually furnished to the scientists before our first core. These guides are located in the following folder on VOL1:
V:\IODP_Share\ALL things DESClogik\Technician Guides and Quick Starts
There are several other guides and resources in that folder which help with common entry mistakes, printing labels and general tips. Any of these guides can be given directly to the scientists.
4. How do I find my samples in DESClogik?
DESClogik has a sample selection and filter feature, which is the only way scientists can enter data. Scientists click on the blue globe, select expedition -> site -> hole, check the boxes to apply the various filters, and then double-click on the sample populated into the Samples list. Examples are shown in the figures below. For more details on possible sample types, see the PAL Sample Entry guide mentioned in question 3.
Users MUST have a sample type (left column of the sample selection window) selected, or no samples will show up in the sample selection. The column on the right (test lists) is only used to further filter sample types after they have been selected in the left columns.
Core describers typically select Section halves and Show only… -> Archive halves, Figure 2.
Paleontologists typically select TPCK or OTHR under Sample types, and by discipline under Test list, Figure 3.
Smear Slide (SS) describers select Smear slides under Sample types, and Thin sections for thin sections.
Figure 2. Sample Selection. Shown here is the section half selection for core description.
Paleontologists will have to filter by their Sample types and by Test list, so, which boxes to check depend on how they have entered their sample. The most common sample types are TPCK for nannofossils, diatoms and radiolarians, and OTHER for foraminifera (forams). Note: ignore test list types FORAMB and FORAMP. You can always check more boxes, but then you could be entering paleo data on chemistry samples. The test filters are pretty straightforward as long as samples were created with the correct test. A paleo sample example is shown in Figure 3 below.
Figure 3. Paleontological Sample Selection. In this figure a nannofossil sample is selected.
5. How do I upload data, and how do I know it's been uploaded?
Data is uploaded by clicking the Upload icon shown in Figure 4. The data entry form cells highlighted in blue are un-uploaded data, once DESClogik saves a cell to the data base the cell should change to normal (sometimes it might not, but don't worry--it's there in some form or another).
Once an upload is complete, scientists should check their data by downloading what they have just uploaded. The user selects a set of samples they wish to see, by clicking and holding the Shift key or Ctrl key, or by selecting the Sample types-> Hole, then clicks the Download icon to the right of the upload.
Figure 4. Uploading Data. Note the cell color changes from blue to normal when upload is complete.
6. How do I download my data/Why can't I download my data?
To download data, the preferred method is to select the Sample types-> Hole, which will always appear at the top the Samples list if the Sample type->Hole is selected. Then click the Download icon to the right of the upload icon. The download by hole will get all the data for that template, and for that hole. It is a great way to make sure the user is not creating any duplicate descriptions. Alternatively, the user can select a set of samples they wish to see by clicking and holding the shift or Ctrl key and highlighting the sample range from the Sample list window shown in Figure 3. This method is preferred if there is a large amount of data.
If they do not see their data upon download, first try and download by Hole. This will catch all sample types entered as well as all depths. There is a good chance they logged their data against the wrong sample, or the depths in the hole have shifted and a re-calculate depths must be done in Sample Master. It is also possible they did not upload anything last time they entered, or someone may have canceled their data. The DESC tech can find a recovered copy of their screen last time they uploaded. See question 12. DESClogik froze while uploading data, what do I do and how can I recover my data?
7. How do I delete (cancel) data?
Deleting and canceling in DESClogik mean two different things. "Deleting" means clearing a cell or row of cells of un-uploaded data. "Canceling" means canceling in the database, and it is not easily recoverable. To delete data in a single cell use the delete key. To delete an entire row, right click on the row number and select clear row. A warning will appear. To delete un-uploaded entries from either the whole sheet or the entire template, click the Clear icon that's to the right of the Download icon, with or without the All Tabs box checked.
To cancel the data, select the cell and hit the Delete key or right-click a cell and select Cancel Value. You can highlight multiple cells and hit the Delete key. A warning will appear asking if you really want to cancel all the cells' data.
8. How do I export an Excel copy of my data?
Exporting an Excel copy is very easy. Download all relevant sample data (see Question 6). Click the green Export icon at the top right of the window icons, Figure 5. Check the box Data only and hit O.K.; the Include classifications box is automatically checked and should be. This will export an Excel workbook with everything downloaded, if you do not check this box you will get a blank Excel workbook with only the column header names. Sometimes these are useful if scientists (usually structural geologists) wish to record by hand their observations and measurements on paper first. However, this is typically discouraged because it's double the work and prone to entry mistakes.
To download and export all the data on every tab of the DESClogik template, simply check the All Tabs box before downloading, and leave it checked when exporting (Figure 5). NOTE, the export progress window will often hang after it finishes, you can just close the window with the red "x" in the corner and all will be well.
Figure 5. Exporting Data as an Excel Workbook.
9. How do I import data to my template?
Importing data from Excel can be a bit tricky due to a few DESClogik quirks (you would probably call them bugs). In general you simply copy and paste in from an Excel sheet, being sure that the columns are all the same, and the samples are correctly labeled. The trick is to not copy the depths (the offsets are okay). DESClogik will calculate the depths for the user once the samples, with the intervals, are pasted in. So copy and paste in two chunks. Note: it is really easy to mess up which data goes with which sample, especially since the cell you click to paste in will populate with whatever sample is loaded from the Select Sample globe. This sample will be overwritten, so no worries there. Lastly, hit Upload.
10. How do I move, widen, or remove columns/Can I change the look of my template?
Scientists have a few options when it comes to customizing their templates. They can widen and shrink columns just like in Excel. They can hide and unhide columns as well by right clicking, choosing Edit Visibility, checking and unchecking the list of all columns. Data associated columns will not disappear, the column will just have to be unhidden in order to download data. These permissions are set by the DESC administrator, so some features may not be available. Changes can be saved permanently or per session; a dialogue warning will appear after each action (Figure 6).
NOTE: changes saved will apply to all users of the template, and some might not like what one person has done.
Figure 6. Template Changes Warning
11. My data looks different then when I uploaded it/there are duplicate descriptions?
If downloaded data does not look the same as when uploaded, the template column definitions might be duplicated. The administrator must correct the issue, so please let them know.
If there are duplicate descriptions, it is likely the scientists have not been downloading the data for their samples before entering. To correctly edit or add data to a described sample the user must first download the data (see question 6). Then they can enter new data or use the delete key to cancel and or edit existing information. It is just good practice to download before entering. The duplicates can be removed by converging data to one of the samples, and then canceling the others. This is best left to the DESC admin.
12. DESClogik froze while uploading data, what do I do and how can I recover my data?
A good practice reminder is to have the user export an Excel copy (see question 8) before making any large uploads, i.e. a core's worth. Then the user knows for sure the data is saved with them and they can copy and paste it back in (question 9). If they have not exported a copy, only a DESC administrator will be able to recover a snap shot of the DESC entry form at the time of upload.
If DESC is totally frozen, then the program must be killed within the Windows Task Manager (Ctrl+Alt+Delete). After killing the program, reopen DESC and have the same user who was logged on at the time of the freeze log in again. The Autosaves upon upload is specific to each user, so if the user from a previous shift was still logged in, recovery would have to wait until they return (or you could try and guess their LIMS password!). For this reason, users are encouraged to log out at the end of their shifts and let the new shift log in. Once logged in, open the proper template, go to the Recovery tab, click on the Last Autosave, and have an admin log in (Figure 7).
Figure 7. Recovery and Admin Login Screen.
Now the admin can browse autosaved files by timestamp. The last save is on the bottom of the list. Make sure the entry screen is clear and select the appropriate file, and click Load. The program will populate the template with all the entries at the time of autosave, Figure 8. These entries will have to be uploaded to save them to the database, so click back onto the Spreadsheet Tools tab. It's not perfect, and some entries might not be there. The user needs to check what's there and upload when they are satisfied--just hit the Upload icon at the top of the window (Question 5.)
Figure 8. Autosave File Browser and Loader.
13. DESClogik gives a warning message when I try to exit/clear samples?
If a warning message appears when exiting DESC, or when clearing samples, like the one in Figure 9, then the user has entries/data they have not yet uploaded. Each template tab with un-uploaded data will have an asterisk next to its name. The warning message gives the user the option of losing the changes and closing, uploading before closing, or canceling. It is best practice to cancel and look for the un-uploaded data and clear it or upload manually before closing. This should prevent unwanted removal of "good" description data.
Figure 9. Error Message of Un-uploaded Data.
14. Do I need to describe the missing whole-round samples, like PALs and IWs, in DESC?
NO. When the publications specialist plots their visual core description sheets (VCDs/Barrel Sheets) the software they use will fill in the missing core with an appropriate sample symbol. Describers should be reminded to only describe what they can see, and enter only data that would be considered an observation, not an interpretation. They do need to add a foam spacer to the bottom of the section-halves before they scan with the SHIL. They do not need to insert foam on the SHMSL.
15. Where are hand lenses, scrapers, smear slide sheets, etc.…?
Hand lenses are supposed to be in the blue cabinets (3rd drawer down) past the description tables, under the smear slide station. Numerous other description related things are in that drawer/cabinet, like protractors, goniometers (fancy protractor), grainsize cards, microscope slide, paper description sheets, toothpicks, etc. If none are there, try the Special Curation Tools drawer of the splitting room. Lastly, you can get a new one from the ALO office; ALO needs to checkout.
Stainless steel core scrapers are in the Special Curation Tools drawer of the splitting room. You might also find hand lenses in there.
There are often leftover smear slide (SS) description sheets in the Description drawer, but it is best to look in the VOL1 folder link below and under the DESClogik_EXP# folder. The science party makes changes to these from expedition to expedition, so old ones might not match. You can always copy a blank one if they asked you in time.
V:\IODP_Share\ALL things DESClogik
16. I need to add a term to our value lists.
Terms can only be added by a description technician (admin). You should have the scientist send all changes in an e-mail to the DESC tech, with their fellow description scientists copied on that e-mail.
In the meantime, scientists can type the value into DESClogik descriptions, and the DESC tech can add the value to the value list after the fact.