Restarting the iRIS cRIO

Owned by jr_brattin
Last updated: Oct 09, 2023
1 min read

Possible from any computer that has the latest iRIS LabVIEW code checked out and LabVIEW 32-bit installed.

The computer in the Ops office is one option (as of this writing 10/8/2023).

  1. Open LabVIEW 32-bit

  2. Open the iRIS cRIO project (extension is lvproj)

  3. Right click on the iRIS cRIO in the project's file tree

  4. Hover the mouse over the 'Utilities' option

  5. Click on 'Restart'

  6. Enter the credentials (currently in the ship password safe)