...
- On may 29th WinFrog2 user profile became corrupted and had to be completely reset by the MCS. This was found when computer would freeze anytime user tried to access the C: drive. Unclear what the cause was but it did occur after a few windows updates.
- After the new daq account was made Bathy2010 software had many issues as documented in the UW lab notebook. The fix was to do a fresh install of the program and everything was fine after that.
Navigation
- Installed new SPS365 Trimble receiver (tag # 53949) in BLO to replace SPS351(tag # 52267). The SPS351 will be kept onboard as a working spare and is stored in UWGL drawer B2 with the rest of the spare Trimble GPS cables. The new antenna was not installed and is stored in B2 as well.
- Had issues getting JRData Server to receive NMEA data from WinFrog over the network. Port 128 has rules and everything set up my the MCS to make the transfer happen but it is still being blocked by windows defender. Right now the only work around that the MCSs and I could find was to disable the firewall.
- Collected navigation data using WinFrog with no issues. Other than JRData Server and its work around, all instrumentation data connections to and from WF were stable.
...