Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Figure 8. The left-hand panel consists of the focusing, beam area, signal processing (Image area) and scan rates(Scan area) controls

Image Removed

Figure 9. Various scanning speeds. Button in the top right is the measuring tool, where you can measure the distance and angle between two points, measure a marked area and annotate

Focusing the microscope

  1. Click the buttons under “Focus” area to adjust the focus (Figure 10) until an image is visible. This should be at approximately _______________. <<<need to describe how to use the UI
  2. In several steps, increase the magnification then adjust the Focus first using the Coarse Focus Adjustment arrows, then the Fine Focus Adjustment arrows. Do this until you have reached a good focus at the desired magnification.

...

Adjust the brightness/contrast

Change the scan speed


Image Added

Figure 9. Various scanning speeds. Button in the top right is the measuring tool, where you can measure the distance and angle between two points, measure a marked area and annotate

Get a technician

Advanced image correction (for technicians)

...