...

1. Dust all the overheads and vacuum the air vent.
2. Wipe down all the walls.
3. Clean all the counter tops and doors.
   1. Leave the shelf liner in place. If they do not get clean replace them with new ones.
4. Clean out the sink in the lab and the one outside the lab.
   1. Remove and spray off the tray that sits in the sink in the lab. Once everything has been cleaned replace all the greeny meanies with new ones.
5. Clean/dust the microscope and cover it.
6. Unplug hot plate and replace Teflon if it is torn up.
7. Clean off EpoTech dispensers.
8. Empty all four sediment traps: for the LP50 and WG2, Buehler lap wheel, inside, and outside sink.
9. Fill all spray bottles.
10. Wipe down stoles stools and the step stolestool.
11. Clean the counter lights.
12. Dust the TVs and computer.
13. Clean the ultrasonic cleaner if it was used.
14. Clean the VS2 by dusting it off.
15. Clean and cover the Buehler MetaServ 250.

16. Perform a physical account of epoxy and update the AMS check-out sheet, taking into account the expiration date of unopened bottles.

Credit

Original version created by Susan Boehm

Archive 

• X397T archived version
• End of Expedition Cleanup

...