...
- Dust all the overheads and vacuum the air vent.
- Wipe down all the walls.
- Clean all the counter tops and doors.
- Leave the shelf liner in place. If they do not get clean replace them with new ones.
- Clean out the sink in the lab and the one outside the lab.
- Remove and spray off the tray that sits in the sink in the lab. Once everything has been cleaned replace all the greeny meanies with new ones.
- Clean/dust the microscope and cover it.
- Unplug hot plate and replace Teflon if it is torn up.
- Clean off EpoTech dispensers.
- Empty all four sediment traps: for the LP50 and WG2, Buehler lap wheel, inside, and outside sink.
- Fill all spray bottles.
- Wipe down stoles stools and the step stolestool.
- Clean the counter lights.
- Dust the TVs and computer.
- Clean the ultrasonic cleaner if it was used.
- Clean the VS2 by dusting it off.
- Clean and cover the Buehler MetaServ 250.
Perform a physical account of epoxy and update the AMS check-out sheet, taking into account the expiration date of unopened bottles.
...
Original version created by Susan Boehm