Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 28 Next »

Chassis : NI-9147 ethernet expansion chassis for C Series modules

The chassis & power supply are ready to be installed by the Chemistry Technicians where they would like it. We are awaiting for 32-bit LabVIEW to be installed on the ChemTech PC so the programming can commence. Please contact jr_moortgat (on shore) for questions.


  • Get MCS to install 32-bit LabVIEW. Email sent for this request


Hardware

MAC 00:80:2F:31:57:92

Physically connected to LAN–070

hostname : NI9147-FCL

IP : 165.91.72.104; Subnet : 255.255.255.128; Gateway : 165.91.72.2; DNS : 165.91.150.5

Software installed

LabVIEW Real-Time 17.0.0


Module : NI-9871 4-port RS485 C Series serial interface module

Twinfly P1-150-24 external power supply (+24 V) connected to NI 4POS female microfit pigtail, 2 conductor (P/N 198159-01).

Port 1 : RJ-50 connection to O2 sensor via RS-485.

AMI 2001RS : RS485

pin A - DATA (pos) to RXD (pos)

pin B - DATA (neg) to RXD (neg)


LabVIEW programming

This NI link is a good starting point.


  • No labels