Raise3D Manuals and Guides

• Pro2 Series Quick Start Guide

• IdeaMaker user guide

• Nozzle replacement

• Nozzle height calibration

• Dual-nozzle offset calibration

• Remove jammed filament

• Load/Unload Filament

• Pro2_Series-105 XY Gantry Adjust

• Build Plate Installation

• Hot end replacement

• How to Clean the Build Surface

• How to set the Extruder Tension Properly

• Shaft lubrication

• Bed leveling calibration

• Printing with dual filaments

Tips, Tricks, and Resources

• Some 3D Printing tips from shore

• Raise3D forum boards: browse for your questions here first

• IdeaMaker Beginners Guide

• Q&A and specs on our filament dryer compliments of Matter Hackers.

• Applying Kapton tape

•  as a bed surface for printing ABS plastic

• 3D printing materials pros & cons

• Filament-comparison-guide

• Garolite build surfaces for hard-to-adhere filaments

• Top 10 tips for getting started with 3D printing

• 3D printer troubleshooting guide

• Supports and overhangs:  all3dp.com and pinshape.com have some good tips and tricks

• Thingiverse.  All the models you can eat.  Check out the categories.

• Generalized test object (with bonus links to helpful procedures)

• 3D-printable topographic maps (incl. some bathymetry!)

Support

Raise 3D Website offers ticket based support as well as machine/software specific support pages. Also can email Inquiry@raise3d.com and phone +1 888 963 9028.

Matter Hackers is a great site for video tutorials and other information on all things 3D Printing:  support@matterhackers.com for email tickets; by phone at 949-613-5838.

Open

Files:

• XSCAN Section Extractor Tool: XSCAN_section-extractor-holder.STL

• WRMSL-PWL "squeegee":  SolidWorks drawing and printable file for Idea Maker. Printed with red Ninjaflex filament.  Bolt holes omitted for now; prints faster without and easy enough to do with a hole punch.

• PWC-shear-wave adaptors SolidWorks models: 1. Adaptor; 2. Clamp; 3-Assembly

• Downhole Multi-Tool Holder: SolidWorks drawing and printable .STL file.

• Stackable V-Angle Tool Holder:

• GRA Stabilizing Shim

• Pallet jack front stabilizing wheel: SolidWorks drawing and printable .STL file.

• SHIL Light Shields- SHIL_70 Degree Light Shield_FRWD.SLDPRT, SHIL_70 Degree Light SHield_AFT.STL

• Vial holders (3Dprint file use PLA, 1 mm shell, 1% fill and everything else are default values)

  • top and bottom halves of 81-vial prototype holder for paleo samples. Solidworks version top, bottom.

  • LS5329 vials in 8x8x4 cardboard box (SLDPRT, STL, GCODE, DATA files)

  • LS5329 vials in original blue box (SLDPRT, STL, GCODE, DATA files)

  • LS5330 vials in 8x8x4 cardboard box (SLDPRT, STL, GCODE, DATA files)

  • Snap-on legs (SLDPRT, STL, GCODE, DATA files)

•  

  • Sampler Actuator End.stl

  • Sampler Beacon Guide_395.stl

  • Sampler Beacon Guide_395.SLDPRT

  • Shear Pin.stl

  • niskin_5L_weaklink_holder.STL

  • niskin_5L_weaklink_holder.SLDPRT