INSTRUMENTS AND EQUIPMENT
GOOD AERIS XRD
GOOD BRUKER Tracer5 pXRF
GOOD ICP BEADMAKER
GOOD SPEX SHATTER BOX
GOOD HASKRIS
GOOD MUFFLE FURNACE
GOOD DISMEMBRATOR
GOOD* X-PRESS
GOOD RETSCH MM400 MILL
PREVIOUS INSTRUMENT OLYMPUS pXRF HANDHELD
GOOD BALANCE - Mettler-Toledo XS204 Dual-Balance System
To change the status of an instrument, Log in and go into Edit mode. Click on the instrument status button and change it depending on the severity of the issue. Remember to make a note about the issue on the actual instrument page.
XRD Reference (add diffractograms of stds here)
Balances
- Mettler Toledo Excellence Model XS204 parts 1-3
XS-Anaysen-BA-e-11781099.pdf
XS_Syst-Appl_BA_e_11781118A.pdf
XS_Just-Test_BA_e_30003899.pdf - Balance Standard Interface Command Set
Excellence-SICS-BA-en-11780711D.pdf
Current Tasks/Issues
- Get Bruker XRD personalized training hours purchased. Quote expires before .
- Schedule Bruker XRD personalized training sessions. Waiting on purchase of training hours.
- Compile list of topics for Bruker training sessions. Currently some topics listed in the email chain.
- Decide whether to get the Aeris software updated via a site visit in Tarragona. Waiting on an updated quote to reflect the correct location.
- Decide whether to send the Tracer 5 back to Germany during 398P from Tarragona to fix the proximity sensor. If yes, begin RMA paperwork early Feb
- Tracer Quick Start guide
- Tracer full User guide
- Edits to Safety guide and presentation for the Tracer
: During a sample run , the Bruker began to suspend all processes/jobs and shut off the Xrays. It was noted that the flow rate on the Haskris dropped to below 4l/min. The temperature on the Haskris read well above 69F. It was also noted that even though the Haskris was "on" the motor was not running. The Haskris was restarted mulitple times but the motor kept dying. Eventually the motor began running again and normal operation seemed to resume.