Laboratory Notebook

All content
Blogs
Space settings

Results will update as you type.

ALO Notebook homepage
Lab Notebooks
Archived Technical Reports
Facility Maintenance
IODP/JRSO Safety Central
•
Report a Software Issue
•
All Reported Software Issues
JOIDES Resolution Microbiology/Radioactive Van Log sheet Protocol
Radvan Protocols and Forms
•
IODP Confluence Spaces & Pages
•
LORE Report Comments Project Page
•
Plan Zulu 2020
COPE Document and EVALUATIONS
•
Who's responsible (IODP vs SIEM)
•
Forms Definition Page
•
JRSO Mini Projects V1
•
Creating Property Record for Blue Tags
•
Expedition training checklist and Acknowledge Forms
Exp 397P KTLF
•
Exp400T projects/tasks in Amsterdam (tieup/drydock)
•
398P Tie Up Projects
DEPRECATED
•
398 PFD Test
EXP401 Technical Reports
•
X402 Paleomagnetism Tech Report
Exp 402T Technical reports
•
Pmag Check Ups
EXP403 Technical Reports
EXP404P DEMOB

Laboratory Notebook

Lab Notebooks

379P/T SEM EDS install

Owned by Former user (Deleted)

Last updated: Nov 11, 2022

2 min read

Loading data...

Plan

Exp 397P

Disassemble and pack Hitachi (pending turbopump servicing, see communication with Marine Reef Intl Linda Dailey) - 8/20/2022

Sandra and Fabricio conduct remote training with Jon Lechich (NanoImages)

If possible, unpack/stage contents for new SEM and mount in Paleoprep Lab - 8/26/2022 staged in Paleo Prep, except for Controller and SEM which are staged on CloseUp station for easy access, also they are heavy - easier to move to/from there

If possible, get new SEM computer set-up on IODP network (requires internet, intranet, all SEM software, TeamViewer) - update 9/7/2022: Esprit Compact software USB stick missing, MCS is installing everything else requested, waiting for Jon Lechich to get back to us via email

Exp 397T

Identify project collaborators and begin planning/scheduling (e.g. ET, Mills, MCS, Ops if Siem welders are needed)

Stage materials if not already done

Work on mounting attachment hardware/anti-vibrational mount to existing SEM bench (drilling the bench, drilling holes in steel plate, potentially cutting steel plate)

Set-up new SEM computer on IODP network (requires internet, intranet, all SEM software, TeamViewer)

Set up hardware (using temporary cork mounts if anti-vibrational mount not ready)

Test basic functionality/troubleshooting SEM set-up with Jon Lechich

Test finer functionality of SEM/troubleshooting on fossils, grain mounts and thin sections while thrusters are down and during transit (consulting Jon as necessary)

Set-up anti-vibrational mount if not set-up during Phase 2

Finalize user guides

With James Brattin, work on SEM Uploader

Exp 397

Sandra, Fabricio, Aidan do remote training with Jon Lechich/Kara/Luan (note that Pacific time is 9 hours off CPT)

During the expedition, SEM is operated with guidance from Sandra/Fabricio/Carlos. Kara/Luan (Jon Lechich if necessary) available for shore-based support