Muffle Furnace Programs
- Former user (Deleted)
Muffle Furnace Programs.docx - Document for easy printing
As of Dec 30, 2021 Programs pre-set on the furnace are as follow:
All temperatures in Celsius
Program 1 : Typical ICP LOI program:
Ramps to 900 degrees at a rate of 3 degrees per minute. Dwells for 1 hour. Ramps to 1025 degrees at a rate of 3 degrees per minute. Dwells for 4 hours. Ramps down to 24 degrees (or room temperature). Program Ends.
Hb OFF Hb U 0
Rmp.U min ramp units are in degrees per minutes
dwL.U Hour dwell units are in hours
CYC.n 1 number of cycles to repeat
Seg.n 1
Rmp.r tGt 900 rate 3.0
Seg.n 2
Dwell dur 1.0 hour
Seg.n 3
Rmp.r tGt 1025 rate 3.0
Seg.n 4
Dwell dur 4.0 hour
Seg.n 5
Ramp.t tGt 24 dur. 0.0
Seg.n 6
Type End
Program 3: Typical XRD clay heat treatment:
Ramps to 550 degrees at a rate of 3 degrees per minute. Dwells for 1 hour. Ramps down to 25 degrees (or room temperature). Program Ends.
Hb OFF Hb U 0
Rmp.U min ramp units are in degrees per minutes
dwL.U Hour dwell units are in hours
CYC.n 1 number of cycles to repeat
Seg.n 1
Rmp.r tGt 550 rate 3.0
Seg.n 2
Dwell dur 1.0 hour
Seg.n 3
Rmp.t tGt 25 dur 0.0
Seg.n 4
Type End
Program 2: Alternate ICP LOI program:
Ramps to 950 degrees at a rate of 3 degrees per minute. Dwells for 4 hours. Ramps down to 25 degrees (or room temperature). Program Ends.
Hb OFF Hb U 0
Rmp.U min ramp units are in degrees per minutes
dwL.U Hour dwell units are in hours
CYC.n 1 number of cycles to repeat
Seg.n 1
Rmp.r tGt 950 rate 3.0
Seg.n 2
Dwell dur 4.0 hour
Seg.n 3
Rmp.t tGt 25 dur 0.0
Seg.n 4
Type End