Dismembrator
- jr_barnes
- Former user (Deleted)
- Former user (Deleted)
- jr_kars
Owned by jr_barnes
Jun 3, 2022 The dismembrator was not used during Expedition 390.
Dec 27, 2021 Systematic Error when turning on the dismembrator: "Power Overload Error". The program does not start when we press 'Start' after turning on the dismembrator (P=0). Press 'Test' first and then 'Start'. This should start the program. If this does not work, press "Reset", then "Test", and finally "Start". This should clear the error and the dismembrator should start vibrating.
Will not work during transit unless plugged into a Regulated Power (RP, blue) outlet.
'Continuous' mode needs to be manually stopped using the 'Start/Stop' button. 'Time (min/sec)' mode will turn off automatically after 1.5 minutes.