Thin Section Laboratory Notebook
GOOD Logitech LP50
GOOD Buehler PetroThin
GOOD Buehler MetaServe 250 Grinder Lap Wheel
good Kemet Kemvac Vacuum System
GOOD Welch/ Vac Tech Vacuum Pump (for PetroThin) (and Logitech VS-2 water trap)
GOOD Edwards Vacuum Pump (for LP50)
GOOD Logitech PLJ2 Jigs
GOOD Zeiss Petrographic Microscope
GOOD
issues
down
To change the status of an instrument, Log in and go into Edit mode. Click on the instrument status button and change it depending on the severity of the issue. Remember to make a note about the issue on the actual instrument page.
Quick links
Thin section lab technician SOP
THIN SECTION REQUEST FORM.docx (Downloading and opening in Word produces proper formatting. Type in Exp # to customize and print)
Works in Progress
Suggested questions for Logitech Training (updated with answers)
Sediment thin section draft procedure
X384 Epoxy Impregnation Experiments
X390C Soft Sediment Thin Section Procedure
Soft Sediment Techniques
379 Images and Descriptions.pptx (must download to view)
Special Methods by request only:
Carbonate Staining with Alizarin Red S
Resources
General
JOIDES Resolution On Board Thin Section Evaluation Form.docx
Instrument and Methods Troubleshooting
Logitech Thin Section Production Manual (not IODP T/S lab SOP)
Selected Chemical MSDS
Epotek 301 Epoxy Part A and Part B MSDS
Online Resources
Big data in microstructure analysis: Building a universal orientation system for thin sections
http://publications.iodp.org/proceedings/345/102/102_f2.htm
https://www.bidenschool.udel.edu/chad/research-programs/lab/online-tutorials
Manufacturer Manuals
Buehler PetroThin
Kemet Kemvac Vacuum Impregnator System
Logitech LP50
Abrasive Autofeed Cylinder (Chemlox) Equipment Manual
Abrasive Autofeed Cylinder (Non-chemlox) Equipment Manual
Lapping Plate Flatness Control Manual
LP50 Service and Fault Finding Guide
Logitech Abrasive Autofeed Cylinder reassembly instructions
Logitech PM5
PM5 Operation and Maintenance Equipment Manual
PM5 Operation and Maintenance Equipment Manual w Autolap
Logitech WG2 Polisher Attachment for PM5
Tasks
Past Issues
Equipment Issues/Maintenance History
Logitech Abrasive Autofeed Cylinders
Nov 15, 2020 Disassembled, cleaned and maintenanced. Upon reassembly, I (Luan) was having trouble with adjusting the drip rate down, but with help from Susan and John McCrossan (Logitech Process Engineer) I reassembled it properly. Instructions for the reassembly of cylinder valve are here and on the Thin Section lab computer.
Non-Equipment Issues
Epo-tek 301 1LB Kit
Aug 13, 2019 All remaining unexpired Epo-tek epoxy (5 kits) will expire on October 30, 2019. This was communicated to current ALOs/LOs and the LO of the upcoming expedition (during which epoxy will expire). Recommendation was made that that epoxy should be ordered 3 bottles at a time with no less than 6 months in between orders, since the storage shelf life is only 12 months. End-of-expedition cleanup list was edited to add an action item "Perform a physical account of epoxy and update the AMS check-out sheet, taking into account the expiration date of unopened bottles".
Aug 8, 2019 Chemistry Technician Vincent Percuoco requested that Thin Section Technicians use 1 mL disposable transfer pipettors for Epo-tek epoxy in order to avoid epoxy damage sustained on non-disposable pipettors.
Zeiss Petrographic Microscope
Jul 23, 2019 Thin-section lab microscope was removed and replaced with microscope previously located in the smear slide area. The new microscope is larger, has more features, and is much cleaner than previous lab microscope.
Expeditions
See various Expedition Technical Reports